NEUMÁTICOS PARA EL SECTOR DE LA CONSTRUCCIÓN
Desde invertir en equipos fiables a completar un mantenimiento periódico, hará lo que haga falta para garantizar que los tiempos muertos no reduzcan la productividad de su equipo. Para que pueda seguir en funcionamiento, fabricamos nuestros neumáticos con materiales de gran resistencia que ofrecen una máxima vida útil.
También puede elegir un neumático que se ajuste a las condiciones del lugar, desde un césped tupido a una zona de áridos accidentada. Ello se debe a que diseñamos, probamos y fabricamos neumáticos para que se adapten a muchos tipos de equipos y aplicaciones, incluidas las retroexcavadoras, volquetes y motoniveladoras.
Low Sidewall Technology® (tecnología de flanco con perfil bajo)
Al igual que nuestras principales marcas de neumáticos, nuestra tecnología LSW® (flanco de perfil bajo) ayuda a los contratistas a maximizar su productividad dentro y fuera de la obra. Tiene un flanco menor y mayor diámetro de la llanta al compararlos con un neumático convencional, manteniendo el mismo diámetro exterior. Esto ofrece mayor estabilidad a los equipos de construcción. El resultado es una conducción más suave, menor vertido de material y mejor maniobrabilidad, entre otras mejoras.
Radial or Bias — You Decide
It’s not about which is better, bias or radial, but about what works best for your specific application. We believe contractors like choices, which is why Titan offers a full line of both bias and radial tyres to help you get the job done, no matter what the setting.
Bias tyres
• Better suited for short distances
• Greater vehicle stability
• Greater cut resistance on the sidewall
• Improved self-cleaning
Radial tyres
• Excellent tread wear
• Longer tread life
• Better suited for longer distances
• Greater puncture resistance in the tread area
• Greater traction
With Titan, you have choices. Contact your Titan dealer today to find out what tyre is best for your application.
PRODUCT LINES
- Low section design for loader backhoe applications
- Designed for excellent durability and good road handling characteristics
- Excellent traction and wear are the benefits of the broad, curved lugs
- High strength construction gives it exceptional durability
- More robust design for use on the front of large backhoes
- An implement tire specially designed for high traction applications
- Frequently used on the front of backhoes
- Engineered with HD sidewalls to protect against abrasions, tears and punctures
- Improved dual tapered step lug for wear and extended life
- Titan’s premium conventional skid steer tire with deeper tread depth, premium compound, larger tread lugs, heavier sidewall and larger rim guard
- Titan’s premium deep tread skid steer tire, designed for use in severe applications such as concrete, asphalt, demolition areas, quarries, glass plants, and scrap yards
- Extra-wide lugs with extensive overlap at the center, designed to resist buckling, tearing and cracking
- Excellent tread wear and roadability, the laterally designed lugs result in even wear
- Extra-wide lugs with extensive overlap at the center, designed to resist buckling, tearing and cracking
- Excellent tread wear and roadability, the laterally designed lugs result in even wear
- Solid performance on rock-hard ground
- Increased wear and performance on hard surfaces
- Excellent traction in soft soils
- Industrial use for rugged applications
- Resists tearing and cracking with special tread compound
- Excellent handling and mobility with its five-rib design
- Deep tread provides excellent rock-type damage resistance and long tread life
- Non-directional, solid centerline tread pattern provides excellent cut resistance, smooth ride and extended wear
- Features Aralon Cut Resistant Breaker (CRB) construction, which provides increased strength and durability without sacrificing heat resistance
- Belted 7x7 - Features 7x7 steel belted construction, which provides increased cut resistance and extended wear
- Extra deep tread provides excellent rock-type damage resistance and long tread life
- Open non-directional tread pattern provides all around traction with excellent self cleaning
- Features 7x7 steel belted construction, which provides increased cut resistance and extended wear
- CRB - Features Aralon Cut Resistant Breaker construction, which provides increased strength and durability without sacrificing heat resistance
- Extra deep tread depth provides long tread life in extreme conditions
- Smooth tread used on the outside provides excellent rock-type damage resistance, while the pattern on the inside provides increased traction
- Features 7x7 steel belted construction, which provides increased cut resistance and extended wear
- Extra deep tread depth provides long tread life in extreme conditions
- Smooth tread design provides the maximum rock-type damage resistance
- CRB – Features Aralon®* Cut Resistant Breaker construction, which provides increased strength and durability without sacrificing heat resistance
- CAB - Features Cushion Armor Breaker steel belted construction, which provides increased cut resistance
- Belted 7x7 - Features 7x7 steel belted construction, which provides increased cut resistance and extended wear
- Exceptional performance rating and heavy duty ply ratings
- Laterally designed lugs provide maximum, even traction along the length of lug
- Lugs resist buckling, cracking and tearing
- Interlocking center lugs provide excellent steering stability in soft ground
- Open shoulders provide excellent traction and self-cleaning
- For use on wheel loaders where high flotation and/or extreme traction is required
- Specifically designed for use on a multi-piece OTR wheel
- Open, deep tread pattern provides excellent traction in extreme conditions
- Tread compound designed for increased resistance to tread chunking and tearing
- Steel belted construction provides excellent penetration resistance
- Premium LSW skid steer tire with all the features of the HD2000 II, plus run-flat capability
- LSW assemblies reduce bounce and lope, and improve lateral stability
- Proven performance tread design with massive lugs, large center overlap to resist buckling, tearing and cracking
- Very durable and resistant to punctures, features a heavy duty tubeless construction
- Easy mobility with the rounded shoulder design
- Withstands scuffing and abrasions with the reinforced sidewall construction
- Large contact area for improved wear
- Lug design offers increased biting edges
- Aggressive tread for optimal traction
- Sturdy tread elements for maximum torque transmission
- Steel belted construction now available to provide increased cut resistance and extended wear
- Constructed of superior heat resistant nylon fabric plies to promote heat dissipation
- Designed for maximum life, this tire is frequently the tire of choice for industrial compactor applications
- Tread Design maximizes traction and clean out for standard duty applications.
- Rim Guard protection against wheel damage.
- Promotes stability and even wear in standard applications.
- Non-directional tread pattern
- Center riding rib for smooth ride and long, even wear
- Full-width shoulder lug for excellent traction and lateral stability
- Additional compounds available upon request
- Steel belted construction to provide increased cut resistance and extended wear
- Steel ply radial construction
- Steel belted for long-term strength and cut resistance
- Dual rated for both Earthmover and Loader speeds for a more versatile tire option
- Non-directional tread pattern
- Center lug with connecting tie-bars for uniform tread wear and increased stability
- Deep tread depth provides extended tread life
- Smooth tread design provides maximum damage resistance
- "Value Engineered" VE-610 tread designed for long wear on concrete and asphalt
- Good choice for industrial equipment
- Directional design for excellent traction and long wear
- For use in soft soil operations where traction and flotation are required
- Exceptional traction design
- Non-directional tread pattern provides long tread life
- Open tread pattern provides excellent self-cleaning
- Steel belted construction to provide increased cut resistance and extended wear
- Directional tread design for excellent forward traction
- Center riding rib for smooth ride and even wear
- Steel belted construction to provide increased cut resistance and extended wear
- Non-directional tread pattern provides long tread life
- Open tread pattern provides excellent self-cleaning and traction
- Steel belted construction to provide increased cut resistance and extended wear
- All-season tread pattern
- Aggressive siping provides excellent traction on all surfaces and conditions, especially snow, ice and mud
- Steel belted construction (17.5R25 only) to provide increased cut resistance and extended wear
- The tire preferred by major manufacturers of uniloaders and skid steer equipment
- Center lug design adds extra traction
- Features chevron tread pattern with nylon fabric construction
- Intended for skid steer use
- Innovative, modernized design for improved cleanout
- Center lug upgrade for better roading
- Designed for outstanding stability and durability
- Optimized for compact and utility tractors used in light construction applications
- Extra long life with up to twice the tread depth of conventional skid steer tires
- Superior damage resistance due to extra heavy sidewall and large rim guard
- Superior traction from high void-to-lug ratio
- Lowest possible cost per hour delivered by specialty compound and industry-leading tread depth
Original giants of bias
We offer more than 250 bias SKUs, 70-plus tread styles, and 120 years in the off-highway business
Learn More